Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.5-RELEASE-p16 #10: Sat Aug  3 14:07:55 ICT 2002
    cws@satellite.miracle.co.th:/usr/obj/usr/src/sys/SATELLITE
Calibrating clock(s) ... TSC clock: 1594839232 Hz, i8254 clock: 1193192 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254"  frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium 4 (1594.83-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf24  Stepping = 4
  Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC>
real memory  = 267649024 (261376K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00377000 - 0x0ff37fff, 263983104 bytes (64449 pages)
avail memory = 257077248 (251052K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f0260
bios32: Entry = 0xfc140 (c00fc140)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xd5ad
pnpbios: Found PnP BIOS data at 0xc00f0470
pnpbios: Entry = f0000:9138  Rev = 1.0
pnpbios: Event flag at 510
pnpbios: OEM ID 5937f351
Other BIOS signatures found:
ACPI: 000f01b0
Preloaded elf kernel "kernel" at 0xc0350000.
VESA: information block
56 45 53 41 00 03 00 01 00 01 01 00 00 00 22 00 
00 01 00 01 17 04 07 01 00 01 1a 01 00 01 28 01 
00 01 00 01 01 01 02 01 03 01 04 01 05 01 06 01 
07 01 0e 01 0f 01 11 01 12 01 14 01 15 01 17 01 
VESA: 28 mode(s) found
VESA: v3.0, 16384k memory, flags:0x1, mode table:0xc02e90a2 (1000022)
VESA: NVidia
VESA: NVidia Corporation NV17 () Board Chip Rev A2
md0: Malloc disk
Creating DISK md0
pci_open(1):	mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=1a308086)
Using $PIR table, 7 entries at 0xc00f01d0
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
found->	vendor=0x8086, dev=0x1a30, revid=0x04
	class=06-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	map[10]: type 1, range 32, base f0000000, size 27
found->	vendor=0x8086, dev=0x1a31, revid=0x04
	class=06-04-00, hdrtype=0x01, mfdev=0
	subordinatebus=1 	secondarybus=1
found->	vendor=0x8086, dev=0x2482, revid=0x02
	class=0c-03-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
	map[20]: type 1, range 32, base 0000efe0, size  5
found->	vendor=0x8086, dev=0x2484, revid=0x02
	class=0c-03-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=b, irq=11
	map[20]: type 1, range 32, base 0000ef80, size  5
found->	vendor=0x8086, dev=0x2487, revid=0x02
	class=0c-03-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=c, irq=11
	map[20]: type 1, range 32, base 0000ef60, size  5
found->	vendor=0x8086, dev=0x2448, revid=0x42
	class=06-04-00, hdrtype=0x01, mfdev=0
	subordinatebus=5 	secondarybus=2
found->	vendor=0x8086, dev=0x248c, revid=0x02
	class=06-01-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
found->	vendor=0x8086, dev=0x248a, revid=0x02
	class=01-01-8a, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
	map[10]: type 3, range 32, base 0000cff8, size  3
	map[14]: type 1, range 32, base 0000cff4, size  2
	map[18]: type 3, range 32, base 0000cfe8, size  3
	map[1c]: type 1, range 32, base 0000cfe4, size  2
	map[20]: type 1, range 32, base 0000cfa0, size  4
found->	vendor=0x8086, dev=0x2485, revid=0x02
	class=04-01-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=b, irq=11
	map[10]: type 1, range 32, base 0000ce00, size  8
	map[14]: type 1, range 32, base 0000cdc0, size  6
found->	vendor=0x8086, dev=0x2486, revid=0x02
	class=07-03-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=b, irq=11
	map[10]: type 1, range 32, base 0000ca00, size  8
	map[14]: type 1, range 32, base 0000c980, size  7
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=8086 device=1a31)> at device 1.0 on pci0
found->	vendor=0x10de, dev=0x0175, revid=0xa3
	class=03-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=10
	map[10]: type 1, range 32, base fd000000, size 24
	map[14]: type 1, range 32, base ec000000, size 26
	map[18]: type 1, range 32, base ebf80000, size 19
pci1: <PCI bus> on pcib1
pci1: <NVidia model 0175 graphics accelerator> (vendor=0x10de, dev=0x0175) at 0.0 irq 10
uhci0: <UHCI (generic) USB controller> port 0xefe0-0xefff irq 11 at device 29.0 on pci0
uhci0: (New UHCI DeviceId=0x24828086)
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: (0x24828086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Logitech USB Mouse, rev 1.10/6.20, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
uhci1: <UHCI (generic) USB controller> port 0xef80-0xef9f irq 11 at device 29.1 on pci0
uhci1: (New UHCI DeviceId=0x24848086)
	using shared irq11.
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: (0x24848086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xef60-0xef7f irq 11 at device 29.2 on pci0
uhci2: (New UHCI DeviceId=0x24878086)
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: (0x24878086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
found->	vendor=0x8086, dev=0x1031, revid=0x42
	class=02-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
	map[10]: type 1, range 32, base fceff000, size 12
	map[14]: type 1, range 32, base 0000df40, size  6
found->	vendor=0x104c, dev=0xac50, revid=0x01
	class=06-07-00, hdrtype=0x02, mfdev=0
	subordinatebus=3 	secondarybus=3
	intpin=a, irq=255
found->	vendor=0x1179, dev=0x0617, revid=0x32
	class=06-07-00, hdrtype=0x02, mfdev=1
	subordinatebus=4 	secondarybus=4
	intpin=a, irq=255
found->	vendor=0x1179, dev=0x0617, revid=0x32
	class=06-07-00, hdrtype=0x02, mfdev=1
	subordinatebus=5 	secondarybus=5
	intpin=b, irq=255
found->	vendor=0x1179, dev=0x0805, revid=0x03
	class=08-80-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
	map[10]: type 1, range 32, base fcefee00, size  9
pci2: <PCI bus> on pcib2
fxp0: <Intel Pro/100 Ethernet> port 0xdf40-0xdf7f mem 0xfceff000-0xfcefffff irq 11 at device 8.0 on pci2
fxp0: using memory space register mapping
fxp0: Ethernet address 00:00:39:f8:f7:86
fxp0: PCI IDs: 8086 1031 1179 0001 0042
fxp0: Dynamic Standby mode is disabled
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
pci_cfgintr_linked: linked (6b) to hard-routed irq 11
pci_cfgintr: 2:10 INTA routed to irq 11
pcic0: <TI PCI-1410 PCI-CardBus Bridge> irq 11 at device 10.0 on pci2
pcic0: PCI Memory allocated: 0x44000000
pcic0: TI12XX PCI Config Reg: [pwr save][pci only]
pcic0: PCI Configuration space:
  0x00: 0xac50104c 0x02100003 0x06070001 0x00024008 
  0x10: 0x44000000 0x020000a0 0x00030302 0x00000000 
  0x20: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x30: 0x00000000 0x00000000 0x00000000 0x07e0010b 
  0x40: 0xab0112a3 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x00449060 0x00000000 0x00000000 0x01000002 
  0x90: 0x616000c0 0x00000000 0x00000000 0x00000000 
  0xa0: 0xfe110001 0x00c00000 0x0000000e 0x0000001b 
  0xb0: 0x08000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
pccard0: <PC Card bus (classic)> on pcic0
pci_cfgintr_linked: linked (60) to hard-routed irq 11
pci_cfgintr: 2:11 INTA routed to irq 11
pcic1: <Toshiba ToPIC100 PCI-CardBus Bridge> irq 11 at device 11.0 on pci2
pcic1: PCI Memory allocated: 0x44001000
pcic1: PCI Configuration space:
  0x00: 0x06171179 0x04900007 0x06070032 0x00824000 
  0x10: 0x44001000 0x04800080 0x00040402 0x00000000 
  0x20: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x30: 0x00000000 0x00000000 0x00000000 0x04a0010b 
  0x40: 0x00011179 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x00010001 0x00800000 0x00000000 0x01000000 
  0x90: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xa0: 0x860011f0 0x0c000000 0x00000000 0x0000d100 
  0xb0: 0x3f3f3fcf 0x0a081020 0x00010100 0x00023f00 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00040000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000008 
pccard1: <PC Card bus (classic)> on pcic1
pci_cfgintr_linked: linked (61) to hard-routed irq 11
pci_cfgintr: 2:11 INTB routed to irq 11
pcic2: <Toshiba ToPIC100 PCI-CardBus Bridge> irq 11 at device 11.1 on pci2
pcic2: PCI Memory allocated: 0x44002000
pcic2: PCI Configuration space:
  0x00: 0x06171179 0x04900007 0x06070032 0x00824000 
  0x10: 0x44002000 0x04800080 0x00050502 0x00000000 
  0x20: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x30: 0x00000000 0x00000000 0x00000000 0x04a0020b 
  0x40: 0x00011179 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x00010001 0x00800000 0x00000000 0x01000000 
  0x90: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xa0: 0x860021f0 0x0c000000 0x00000000 0x0000d100 
  0xb0: 0x3f3f3fcf 0x0a081020 0x00010100 0x00023f00 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00040000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000008 
pccard2: <PC Card bus (classic)> on pcic2
pci2: <unknown card> (vendor=0x1179, dev=0x0805) at 13.0 irq 11
isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0xcfa0-0xcfaf,0xcfe4-0xcfe7,0xcfe8-0xcfef,0xcff4-0xcff7,0xcff8-0xcfff irq 11 at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xcfa0
ata0: mask=03 status0=50 status1=00
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe a=00 b=00
ata0-slave: ATAPI probe a=00 b=00
ata0: mask=03 status0=50 status1=00
ata0-master: ATA probe a=01 b=a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xcfa8
ata1: mask=03 status0=50 status1=00
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI probe a=14 b=eb
ata1-slave: ATAPI probe a=14 b=eb
ata1: mask=03 status0=00 status1=00
ata1: devices=0c
ata1: at 0x170 irq 15 on atapci0
pcm0: <Intel 82801CA (ICH3)> port 0xcdc0-0xcdff,0xce00-0xceff irq 11 at device 31.5 on pci0
pcm0: ac97 codec id 0x594d4803
pcm0: ac97 codec features 18 bit DAC, 5 bit master volume, no 3D Stereo Enhancement
pcm0: ac97 primary codec extended features reserved 1, AMAP, reserved 4
pcm: setmap 5000, 4000; 0xcbf8c000 -> 5000
pcm: setmap 9000, 4000; 0xcbf90000 -> 9000
pcm: setmap d000, 4000; 0xcbf94000 -> d000
pcm0: measured ac97 link rate at 48010 Hz, will use 48000 Hz
pci0: <unknown card> (vendor=0x8086, dev=0x2486) at 31.6 irq 11
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
pcic-: pcic0 exists, using next available unit number
pcic-: pcic1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xe0000-0xeffff on isa0
fdc0: direction bit not set
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80 
bf 1f 00 4f 0d 0e 00 00 07 30 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
08 08 08 0f 00 00 00 00 08 08 08 ff 00 00 00 00 
00 00 00 ff 08 08 08 08 08 08 08 0f 08 08 08 08 
00 00 00 ff 00 00 00 00 08 08 08 ff 08 08 08 08 
08 08 0f 08 0f 08 08 08 14 14 14 17 14 14 14 14 
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80 
bf 1f 00 4f 0d 0e 00 00 07 30 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic3 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic4 failed to probe at port 0x3e2 iomem 0xd4000 on isa0
sio0: irq maps: 0x801 0x811 0x801 0x801
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x801 0x801 0x801 0x801
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: configured irq 5 not in bitmap of probed irqs 0
sio2: irq maps: 0x801 0x801 0x801 0x801
sio2: probe failed test(s): 0 1 2 4 6 7 9
sio2 failed to probe at port 0x3e8-0x3ef irq 5 on isa0
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
isa_probe_children: probing PnP devices
pcic0: Event mask 0x6
BIOS Geometries:
 0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
 0 accounted for
Device configuration finished.
bpf: lo0 attached
bpf: ppp0 attached
new masks: bio 68c800, tty 631892, net 671892
pcic0: Autodetected 3.3V card
pccard: card inserted, slot 0
pcic0: reset 1 int is 10 stat is 4f
pccard: card removed, slot 0
pcic0: BAD Vcc request
pcic0: reset 1 int is 10 stat is 4f
pcic0: Autodetected 3.3V card
pccard: card inserted, slot 0
pcic0: reset 2 int is 70 stat is 4f
pcic0: reset 3 int is 70 stat is 4f
pcic0: reset 0 
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ata0-master: success setting UDMA5 on Intel chip
Creating DISK ad0
ad0: <TOSHIBA MK4019GAX/FA002A> ATA-5 disk at ata0-master
ad0: 38154MB (78140160 sectors), 77520 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
ad0: 38154MB <TOSHIBA MK4019GAX> [77520/16/63] at ata0-master UDMA100
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <UJDA720 DVD/CDRW/1.00> CD-RW drive at ata1 as master
acd0: read 4134KB/s (34515KB/s) write 1377KB/s (1377KB/s), 2048KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, DVD-RAM, packet
acd0: Writes: CD-R, CD-RW, test write
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
Mounting root from ufs:/dev/ad0s3a
ad0s1: type 0x6, start 63, end = 4192964, size 4192902 : OK
ad0s2: type 0xf, start 4192965, end = 44034164, size 39841200 : OK
ad0s3: type 0xa5, start 44034165, end = 78140159, size 34105995 : OK
ad0s5: type 0x7, start 4193028, end = 35648234, size 31455207 : OK
ad0<extended>: type 0x5, start 35648235, end = 44034164, size 8385930 
ad0<extended>: C/H/S start 1023/0/1 (16434495) != start 35648235: invalid
ad0s6: type 0x7, start 35648298, end = 44034164, size 8385867 
ad0s6: C/H/S start 1023/1/1 (16434558) != start 35648298: invalid
start_init: trying /sbin/init
pcic0: Event mask 0x9
pccard0: Assigning wi0: io 0x240-0x27f irq 11 mem 0x0-0xffffffff
pcic: I/O win 0 flags 15 240-27f
wi0: Forcing IRQ to 11
pcic: I/O win 0 flags 5 240-27f
wi0: <WaveLAN/IEEE 802.11> at port 0x240-0x27f irq 11 slot 0 on pccard0
wi0: found Lucent chip
pcic: I/O win 0 flags 15 240-27f
wi0: Forcing IRQ to 11
wi0: Ethernet address: 00:02:2d:5d:35:43
wi0: wi_generic_attach:wi_has_wep = 1
bpf: wi0 attached